Spindle Hand Press (excl. accessories)
Todos los pedidos son personalizados. El tiempo de procesamiento depende de la cantidad total de pedidos. En este momento el tiempo de procesamiento (cola) es de aproximadamente 66 horas.
El tiempo de procesamiento se actualiza diariamente. ¿Es urgente? Contacta con nosotros.
With this hand press and the fitting accessories, you can easily punch holes in leather and biothane and attach rivets or snap buttons.
Spindle Hand Press (excl. accessories)
Easy to make holes and attach rivets
High durability
Lower error rate (compared to working with a punch)
Must attach before use
Excl. necessary accessories
With this hand press and the fitting accessories, you can easily punch holes in leather and biothane and attach rivets or snap buttons. This makes it a practical, multifunctional tool for your dogcollars, -leashes, adapters or halters. The press is made out of cast iron and has dimensions of 80 x 180 x 320 mm.
See here how the spindle works.
Punching holes and pressing rivets
The machine is simple in use, all you need to do is insert the accessories and pull the lever. Because the spindle exerts a downward force and is using the right stamps, the holes will be punched in exactly the right place. When pressing rivets the principle is the same, you only need to switch the accessories.
Spindle and accessories
The spindle hand press has multiple functions and uses different accessories for each one. To make holes you will need the Anvil (available in multiple sizes) and a machine hollow pipe. To attach rivets you will need a Rivet Die Set (available in multiple sizes). You must attach the hand press before use. You can use the Spindlestation, for example. To get a clear overview of the Spindle Accessories and their functions please check out the table below:
Recommended Accessories Spindle Hand Press:
To make holes you will need:
To press rivets together you will need:
Specifications:
- Material: cast iron
- Dimensions: 80 x 180 x 320 mm
- Weight: 3kg
- Colour: Grey
- Screw thread: M7 (Please note: the Effective Diameter is 6.35 mm, your tool insert need to match this size to fit the Spindle Hand Press)
Please note:
- Place an extra layer of biothane or leather under the material in which you make the hole. This will damage the anvil less quickly.
- Please note the Screw Thread is M7, which is the insert for your tools
Artículo #: | MT021836 |
Precio por: | trozo |
Peso: | 3.00 kilograms |
Color: | Grey |
Attribuutcode In deze kolom niets aanpassen! |
Een korte beschrijvende tekst van het attribuut |
---|---|
max_continuous_length | The Max Continuous Length is the maximum length at which the rope is delivered in one piece. Longer pieces will be delivered in multiple parts. However, an exception can be made to some products. Contact us to see what we can do for you! |
breaking_strength | The breaking strength of a material is the maximum amount of tensile stress that the material can withstand before failure, such as breaking or permanent deformation expressed in kilograms. |
color_value_pantone | This Pantone colour is closest to the colour of this product. |
color_value_ral | This RAL colour is closest to the colour of this product. |
rope_material | The Rope Material is the natural or synthetic fiber that is used to produce this rope. |
rope_material_core | The core of this product is a natural or synthetic fiber and is not the same fiber as the sheath around the core. |
¿Tienes dudas? ¡Pide una muestra!
¿Quieres estar un poco más seguro de si este producto es adecuado para tu proyecto? ¡Pide una muestra de este producto. (ca. 10cm)
Haz clic en el botón "Pedir muestra" a continuación para añadir una muestra a tu pedido.
Cómo funciona:
Puedes pedir 1 muestra por producto. En la tarjeta de muestra encontrarás un código de descuento por el valor de la muestra. Este código de descuento solo se puede utilizar para comprar un mínimo de 2 unidades del mismo producto (por ejemplo, metros).
Ten en cuenta. El código de descuento tiene una validez de 2 meses.